Tangless thread insert are more practical, tangless thread inserts are fasteners made of stainless steel diamond steel wire refining, installed in the thread hole of aluminum alloy, engineering plastics and other soft materials, which can strengthen the strength of the thread hole and improve the wear resistance, heat resistance and corrosion resistance of the thread hole.
Tangless thread inserts are more practical, tangless thread inserts do not install the tail shank, do not need to be divided in the installation direction, compared with the tail wire thread insert, the installation speed of the tangless thread inserts is faster, because the tail wire thread insert has the installation of the tail shank, the installation needs to be divided in the direction, can only be one-way installation.
After the tail wire thread insert is installed into the thread hole, it is necessary to use a tool to remove the installation tail handle, and use a tool to remove the installation tail handle from the thread hole, which is better than the tail wire thread insert, because these two steps do not exist for the tail retainer.
Tangless thread inserts can be used for thin parts that require a strong connection without increasing the diameter of the thread hole. Improve the connection conditions: increase the bearing capacity and strength of the threaded connection: The use of tailless thread insert can eliminate the pitch and tooth deviation between the screw and the thread hole, so that the load is evenly distributed, thus improving the bearing capacity and strength of the threaded connection. It can be used to fasten the connection of hard brittle brittle materials such as ceramics, bakelite and glass. Effectively prevent fragmentation.
The characteristics of the tailless thread insert material itself and its surface are extremely smooth, which will not rust the matching matrix when used in harsh environments such as humidity and corrosion, and avoid the loss of replacing the expensive matrix due to the rust death of the thread hole. Heat resistance and corrosion resistance: Due to the high surface finish of the tailless thread insert, it can effectively reduce the friction between the internal and external threads, and the material itself has the characteristics of high temperature resistance and corrosion resistance. It can be used in frequently disassembled and installed parts and frequently rotated thread holes to extend its service life.